B11C9 Code: Meaning, Causes, and Symptoms | OBD2 Codes
B11C9 – Right Temperature Door Travel Too Small
B11C9 Possible Symptoms
Engine Light ON (or Service Engine Soon Warning Light)
B11C9 Possible Causes
Passenger Blend Door Binding,Faulty Passenger Blend Door Actuator,Passenger Blend Door Actuator harness is open or shorted,Passenger Blend Door Actuator circuit poor electrical connection,Faulty A/C Heater Module
After the initial installation of the A/C Heater Module, the controller is calibrated to each individual blend/mode door actuator. These calibrations are stored as in the number of pulses it takes to move the door from one stop to another. The A/C Heater Module drives the Door Actuators by the use of Door Driver circuit and a Common Door Driver circuit and monitors all door actuator pulses to detect door movement in both directions. Most of the door actuators share a common door driver circuit but each door actuator has its own unique driver circuit. Due to shared circuitry, similar Diagnostic Trouble Codes (DTCs) can set at the same time for multiple actuators depending upon the type of circuit malfunction, its location, and the direction the actuator is moving when the malfunction is present. For further information.