B11CB Code: Meaning, Causes, and Symptoms | OBD2 Codes

B11CB – Main/Left Temperature Door Control

 

B11CB Possible Symptoms

 

Engine Light ON (or Service Engine Soon Warning Light)

 

B11CB Possible Causes

 

Driver Blend Door Binding,Faulty Driver Blend Door Actuator,Driver Blend Door Actuator harness is open or shorted,Driver Blend Door Actuator circuit poor electrical connection,Faulty A/C Heater Module

 

B11CB Description

 

After the initial installation of the A/C Heater Module, the controller is calibrated to each individual blend/mode door actuator. These calibrations are stored as in the number of pulses it takes to move the door from one stop to another. The A/C Heater Module drives the Door Actuators by the use of Door Driver circuit and a Common Door Driver circuit and monitors all door actuator pulses to detect door movement in both directions. Most of the door actuators share a common door driver circuit but each door actuator has its own unique driver circuit. Due to shared circuitry, similar Diagnostic Trouble Codes (DTCs) can set at the same time for multiple actuators depending upon the type of circuit malfunction, its location, and the direction the actuator is moving when the malfunction is present. For further information.