B11CF Code: Meaning, Causes, and Symptoms | OBD2 Codes

B11CF – Passenger Frontal Airbag Canister Vent

 

B11CF Possible Symptoms

 

Air Bag Warning Light ON

 

B11CF Possible Causes

 

Faulty Passenger Frontal Airbag Canister Vent,Passenger Frontal Airbag Canister Vent harness is open or shorted,Passenger Frontal Airbag Canister Vent circuit poor electrical connection,Faulty Restraint Control Module (RCM)

 

B11CF Description

 

The Restraint Control Module (RCM) analyzes the deployment loop resistance to determine if a fault exists. The value displayed in the PID is the deployment loop resistance measured by the RCM. If the value displayed is lower or higher than the desired range, the RCM can set a Diagnostic Trouble Code (DTC). As the deployment loop resistance drifts farther outside the desired range, the chance for a DTC increases. Small variations in resistance can occur due to the effect of road vibrations on terminal fit. Crimps and terminals can be affected by stress and harness movement and can cause an increase in resistance due to wire strain. These variables can result in an intermittent fault. For this reason, the test requires the PID value to be within the desired range before the fault is considered repaired, regardless if the module is reporting an on-demand DTC at the time of diagnosis. The OBDII code is set when the RCM senses an open or short to ground or voltage on either passenger airbag canister vent circuit for more than 6 seconds.