B1395 Code: Meaning, Causes, and Symptoms | OBD2 Codes

B1395 – Control Module Voltage Reference Output Circuit Voltage

 

B1395 Possible Symptoms

 

Engine Light ON (or Service Engine Soon Warning Light)

 

B1395 Possible Causes

 

Faulty Heating, Ventilation, and Air Conditioning (HVAC) Control Module,Heating, Ventilation, and Air Conditioning (HVAC) Control Module harness is open or shorted,Heating, Ventilation, and Air Conditioning (HVAC) Control Module circuit poor electrical connection

 

B1395 Description

 

The windscreen temperature and inside moisture sensor integrates the relative humidity sensor, windscreen temperature sensor and humidity sensing element temperature sensor. This sensor assembly provides information about relative humidity level on inside windscreen, temperature of the inside windscreen and temperature of the humidity sensor element. The relative humidity sensor measures the relative humidity on the compartment side of the windscreen. It also detects the temperature of the windscreen surface on the compartment side. Both values are used as control inputs for the Heating, Ventilation, and Air Conditioning (HVAC) Control Module application to calculate the fog risk on windscreen compartment side and ability to reduce fuel consumption by decreasing A/C compressor power to a minimum without causing any fog. The sensor will also enable partial recirculation mode in order to improve heat-up performance of the passenger compartment under cold ambient temperature conditions without the risk of mist build-up on the windscreen. The humidity sensor element temperature sensor supplies the temperature of the humidity sensor element. It is only needed if the thermal contact between the humidity sensing element and the inside windscreen surface is not sufficient.