B153F Code: Meaning, Causes, and Symptoms | OBD2 Codes

B153F – Liftgate Object Sensor Malfunction

 

B153F Possible Symptoms

 

Engine Light ON (or Service Engine Soon Warning Light)

 

B153F Possible Causes

 

Faulty Liftgate Object Sensors,Liftgate Object Sensors harness is open or shorted,Liftgate Object Sensors circuit poor electrical connection,Faulty Liftgate Control Module

 

B153F Description

 

The liftgate object sensors are pressure sensitive touch tapes located on either side of the upper inside edge of the liftgate panel. The two liftgate object sensors are placed in series between the liftgate object sensor signal circuit and the liftgate object low reference circuit. Each object sensor has a resistor as well as a switch. The resistors enable the liftgate control module to perform diagnostic functions on the circuits. When both liftgate object sensors are not pressed, the 5 volt reference voltage supplied by the liftgate control module passes through the resistors and the liftgate control module detects approximately 3.3 volts. Pressing a liftgate object sensor will cause the voltage to drop to approximately to 2.5 volts indicating an obstruction is present. If the liftgate is in the open position, the liftgate control module will prohibit liftgate movement. If the obstruction occurs during the power close function, the liftgate control module will command the liftgate to reverse direction.