B2307 Code: Meaning, Causes, and Symptoms | OBD2 Codes

B2307 – Washer Switch Input Circuit Low

 

B2307 Possible Symptoms

 

Engine Light ON (or Service Engine Soon Warning Light)

 

B2307 Possible Causes

 

Faulty Multifunction Switch,Multifunction Switch harness is open or shorted,Multifunction Switch circuit poor electrical connection

 

B2307 Description

 

The Wiper/Washer Switch is integral to the Multifunction Switch. The Multifunction Switch is connected to the left side of the Clockspring/SAS. The Multifunction switch provides the primary controls for the front wiper/rear wiper/washer systems, turn signals and for headlamp high beam selection. The Multifunction Switch communicates with the Steering Angle Sensor (SAS) (integral to the Steering Column Control Module) via the LIN Bus. The SAS then converts this data to a CAN Bus signal and broadcasts the message to the corresponding module on the bus. The Diagnostic Trouble Code (DTC) sets when the Steering Column Control Module (SCCM) detects the Washer Switch is active for greater than 20 seconds.