C0207 Code: Meaning, Causes, and Symptoms | OBD2 Codes
C0207 – Steering Wheel Position Sensor
C0207 Possible Symptoms
Anti-Lock Brake System (ABS) Warning Light ON,Engine Light ON (or Service Engine Soon Warning Light)
C0207 Possible Causes
Faulty Steering Wheel Position Sensor,Steering Wheel Position Sensor harness is open or shorted,Steering Wheel Position Sensor circuit poor electrical connection
The steering wheel position sensor produces 2 separate voltage signals to indicate steering wheel position to the Real Time Damping (RTD) module. The RTD module converts each signal into a Pulse Width Modulated (PWM) signal to indicate steering wheel position to the Electronic Brake Control Module (EBCM). The EBCM supplies 5 volts to the RTD module on each steering wheel position PWM serial data circuit. The RTD module toggles each of these voltages to ground in order to create the PWM signals. Each PWM signal must have a frequency of 121-134 Hz and a duty cycle of 9-91 percent in order to be a valid steering wheel position signal. With each 360 degree rotation of the steering wheel, each signal transitions from the minimum duty cycle to the maximum duty cycle and then back to the minimum duty cycle. The steering wheel position signals are spaced 90 degrees apart. Therefore, the duty cycles of the 2 signals usually differ, depending on steering wheel position.