C0895 Code: Meaning, Causes, and Symptoms | OBD2 Codes

C0895 – Device Voltage Malfunction

 

C0895 Possible Symptoms

 

Anti-Lock Brake System (ABS) Warning Light ON,Engine Light ON (or Service Engine Soon Warning Light)

 

C0895 Possible Causes

 

Faulty Electro-Hydraulic Power Steering (EHPS) Powerpack,Electro-Hydraulic Power Steering (EHPS) Powerpack harness is open or shorted,Electro-Hydraulic Power Steering (EHPS) Powerpack circuit poor electrical connection

 

C0895 Description

 

The Electro-Hydraulic Power Steering (EHPS) operates when voltage at the EHPS connector is in the range of 34-50 volts. The EHPS will go into standby mode if the supply voltage at the EHPS connector drops below 18 volts for more than 10 milliseconds. The EHPS module shall be turned back ON once the supply voltage rises above 22 volts, without a key cycle being required. If the supply voltage drops below 12 volts, the EHPS module drivers shall shut down and a key cycle will be required to reset. The EHPS module shall withstand voltages up to a transient voltage of 58 volts for 400 milliseconds. If the supply voltage exceeds 55 volts, the EHPS module drives shall shut down and a key cycle will be required to reset. The 36 volts power supply is grounded directly to the negative terminal of the EHPS.