C2414 Code: Meaning, Causes, and Symptoms | OBD2 Codes

C2414 – Motor Current Excessive Overflow

 

C2414 Possible Symptoms

 

Anti-Lock Brake System (ABS) Warning Light ON,Engine Light ON (or Service Engine Soon Warning Light)

 

C2414 Possible Causes

 

Faulty Electronic Power Steering (EPS) Motor,Electronic Power Steering (EPS) Motor harness is open or shorted,Electronic Power Steering (EPS) Motor circuit poor electrical connection,Faulty Electronic Power Steering (EPS) Control Module

 

C2414 Description

 

An operating motor is used to support the driving force of steering wheel when the wheel is turned (rotated) by the driver. The operating motor (a brush type DC motor) is installed in the middle of the steering column and operates the steering column. The Electronic Power Steering (EPS) Motor can be damaged during disassembly or removal of the operating motor, so you must disassemble or remove the EPS motor with the assembly. This Diagnostic Trouble Code (DTC) code refers to excessive operating current values in the EPS motor circuit. This code is set if more than 50A is detected, in the motor, due to open/short of EPS motor control harness, faulty contact or short inside the motor.