P0064 Code: Meaning, Causes, and Symptoms | OBD2 Codes

P0064 – HO2S Heater Control Circuit High Bank 2 Sensor 3

 

P0064: DIY Repairing Video Tutorial

https://youtu.be/WxPt6F88d-s

Check out nonda Auto DIY Center for more engine error code repairing videos.
https://www.youtube.com/playlist?list=PL-Lyko0O0oxHe1AGvzwAz-wokJPXAtW97

 

P0064 Possible Symptoms

  Engine Light ON (or Service Engine Soon Warning Light)  

P0064 Possible Causes

  Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 3,Heated Oxygen Sensor (H2OS) Bank 2 Sensor 3 harness is open shorted,Heated Oxygen Sensor (H2OS) Bank 2 Sensor 3 circuit poor electrical connection,Heated Oxygen Sensor (H2OS) Bank 2 Sensor 3 circuit fuse,Faulty Engine Control Module (ECM)  

P0064 Description

  Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. The faster the heated oxygen sensor reaches that temperature the faster the sensor will start sending an accurate signal to the Engine Control Module (ECM). In order to achieve the require temperature, a heater element is included inside the heated oxygen sensor. The ECM controls the heated oxygen sensor heater element based on signals from the engine coolant temperature and engine load. The ECM controls the heater element circuit by allowing current flow to ground. The ECM monitors the voltage signal received through the heater element circuit and determines the state of the circuit by comparing the voltage detected with the factory specifications.