C028A – Hand Brake Motor Circuit

C028A Possible Symptoms

Anti-Lock Brake System (ABS) Warning Light ON,Engine Light ON (or Service Engine Soon Warning Light)

C028A Possible Causes

Faulty Hand Brake Motor,Hand Brake Motor harness is open or shorted,Hand Brake Motor circuit poor electrical connection

C028A Description

The hand brake control module has an internal motor, apply actuator, release actuator, and temperature sensor. The hand brake control module also contains the logic for applying and releasing the hand brake when commanded by the hand brake switch. When the hand brake control module receives a signal from the switch the internal circuit board temperature is checked to verify it is within operating range before the control module performs the requested operation. The hand brake control module will also diagnose the internal hand brake motor circuit to verify it is functioning properly. The hand brake motor circuit is used to command motor operation, apply and release tension on the hand brake cable, which will apply and release the hand brake. The hand brake will self diagnose the internal Hand brake Motor Circuit. This circuit is used to drive the motor, which pulls on the hand brake cable, ultimately applying and releasing the hand brake.