OBD2 Codes

This site is supported by nonda.co. As a smart vehicle devices provider, nonda helps create a better driving experience for everyone.

Categories

,

B2222 Code: Meaning, Causes, and Symptoms | OBD2 Codes

B2222 – Left Mirror Select Switch Fault

 

B2222 Possible Symptoms

 

Engine Light ON (or Service Engine Soon Warning Light)

 

B2222 Possible Causes

 

Faulty Left Mirror Select Switch,Left Mirror Select Switch harness is open or shorted,Left Mirror Select Switch circuit poor electrical connection,Faulty Driver Door Module (DDM)

 

B2222 Description

 

The driver door switch signal circuits provide inputs to the Driver Door Module (DDM) when a mirror select switch is activated. These inputs allow the DDM to detect a Left (LH) or Right (RH) mirror request. The DDM provides power and ground to the mirror select switches. When a mirror select switch is activated, ground is supplied through the mirror select switch to the signal circuit, which is pulled low. When the DDM detects low voltage on the signal circuit, it will command the mirror in the direction selected. The DDM controls RH mirror functions by sending mirror control messages to the Passenger Door Module (PDM) on the serial data line and the PDM then commands the RH mirror. The DDM monitors both the LH and RH mirror select switch signal circuits to determine how long a ground has been applied. If the DDM detects that a ground is applied for greater than 20 seconds, a Diagnostic Trouble Code (DTC) is set.

 

 

 

Leave a Reply

Discover more from OBD2 Codes

Subscribe now to keep reading and get access to the full archive.

Continue reading