B2501 – Left Lamp Low Beam Circuit Failure

B2501 Possible Symptoms

Engine Light ON (or Service Engine Soon Warning Light)

B2501 Possible Causes

Faulty Left Lamp Low Beam,Left Lamp Low Beam harness is open or shorted,Left Lamp Low Beam circuit poor electrical connection,Faulty Headlamp Switch,Faulty Smart Junction Box (SJB)

B2501 Description

The Smart Junction Box (SJB) sends reference signals to the headlamp switch through circuits. When the headlamp switch is placed in the HEADLAMPS ON position, the voltage signal is routed to ground through the circuit. If the SJB detects a fault with the headlamp switch inputs, the SJB turns the exterior lamps on by default. When the SJB detects the headlamp switch in the HEADLAMPS ON position and the multifunction switch in the LOW BEAM position, the SJB sends voltage through circuits to the low beam headlamps. When the SJB detects the headlamp switch in the HEADLAMPS ON position and the multifunction switch in the HIGH BEAM position, the SJB sends voltage through circuits to the high beam headlamps. The SJB sends a reference signal to the multifunction switch through circuits CLF27 (GN/BN) and CLF17 (WH/OG). When the multifunction switch is placed in the FLASH-TO-PASS or HIGH BEAM position, the voltage signal is routed to ground. When the SJB detects a request for the flash-to-pass, the SJB sends voltage to the high beam headlamps. The OBDII codes when the SJB detects a short to voltage from the Left (LH) low beam voltage supply circuit.