P2327 AUDI – Ignition Coil 10 Primary Control Circuit Low

P2327 AUDI Possible Symptoms

Engine Light ON (or Service Engine Soon Warning Light),Engine may be running rough

P2327 AUDI Possible Causes

Faulty Ignition Coil 10,Ignition Coil 10 harness is open or shorted,Ignition Coil 10 circuit poor electrical connection

P2327 AUDI Description

The current flow, or dwell, through the primary ignition coil is controlled by the Powertrain Control Module (PCM) by providing a switched ground path through the ignition coil driver to ground. When the ignition coil driver is switched on, current rapidly builds up to a maximum value, determined by the coil inductance and resistance. When the current is switched off, the magnetic field collapses which induces a secondary high voltage surge and the spark plug is fired. This high voltage surge creates a flyback voltage which the PCM uses as a feedback during the ignition diagnostics. The PCM continuously monitors the ignition system for concerns. The P2327 code sets when the PCM detects a short to voltage in the circuit.