OBD2 Codes

This site is supported by nonda.co. As a smart vehicle devices provider, nonda helps create a better driving experience for everyone.

Categories

,

P1353 BMW Code: Meaning, Causes, and Symptoms | OBD2 Codes

P1353 BMW – Misfire Cylinder 6 With Fuel Cut-Off

 

P1353 BMW Possible Symptoms

 

Engine Light ON (or Service Engine Soon Warning Light)

 

P1353 BMW Possible Causes

 

Faulty Spark Plug,Faulty Ignition Coil,Intake vacuum leak,Faulty Camshaft Position Sensor,Ignition Coil harness is open or shorted,Ignition Coil circuit poor electrical connection

 

P1353 BMW Description

 

As part of the CARB/OBD regulations, the Engine Control Module (ECM) must determine if a misfire is occurring and also identify the specific cylinder(s) and the severity of the misfire event and whether it is emissions relevant or catalyst damaging. In order to accomplish these tasks, the control module monitors the crankshaft for acceleration losses during firing segments of each cylinder based on firing order. The misfire/engine roughness calculation is derived from the differences in the period duration (T) of individual increment gear segments. Each segment period consists of an angular range of 120??crank angle that starts 78??before Top Dead Center (TDC). If the expected period duration is greater than the permissible value a misfire fault for the particular cylinder is stored in the fault memory of the ECM. Depending on the level of misfire rate measured the control unit will illuminate the Service Engine Soon light, may cutoff fuel to the particular cylinder and may switch lambda operation to open-loop. All misfire faults are weighted to determine if the misfire is emissions relevant or catalyst damaging.

 

 

 

Leave a Reply

Discover more from OBD2 Codes

Subscribe now to keep reading and get access to the full archive.

Continue reading