B0150 CHEVROLET – Air Flow Position Feedback #3 Circuit Malfunction

 

B0150 CHEVROLET Possible Symptoms

 

Engine Light ON (or Service Engine Soon Warning Light)

 

B0150 CHEVROLET Possible Causes

 

Faulty Auxiliary Mode Actuator,Auxiliary Mode Actuator harness is open or shorted,Auxiliary Mode Actuator circuit poor electrical connection,Faulty Auxiliary Heating, Ventilation, and Air Conditioning (HVAC) Control Module

 

B0150 CHEVROLET Description

 

The actuators operate using 5 circuits. A 5-volt reference, low reference, signal circuit and two bi-directional 0 or 12 volt control circuits. The Heating, Ventilation, and Air Conditioning (HVAC) Control Module supplies a low reference and 5-volt reference to the potentiometer. The HVAC control module monitors the voltage drop across the potentiometer on the door position signal circuit. As the actuator door changes position the door position signal circuit voltage also changes. The two bi-directional control circuits enable the actuator to operate. Both circuits are set to 0 volts when the HVAC control module detects, from the feedback potentiometer, that the actuator is in the desired position. In order to move the actuator, the HVAC control module switches the appropriate control circuit to 12 volts.