P0014 BUICK – Exhaust Camshaft Position System Performance

 

P0014: DIY Repairing Video Tutorial

https://youtu.be/olrC8UYw9cQ

Check out nonda Auto DIY Center for more engine error code repairing videos.
https://www.youtube.com/playlist?list=PL-Lyko0O0oxHe1AGvzwAz-wokJPXAtW97

 

P0014 BUICK Possible Symptoms

  Engine Light ON (or Service Engine Soon Warning Light)  

P0014 BUICK Possible Causes

  Dirty Oil,Low engine oil level,Faulty Exhaust Camshaft Position Actuator Solenoid,Exhaust Camshaft Position Actuator Solenoid harness is open or shorted,Exhaust Camshaft Position Actuator Solenoid circuit poor electrical connection,Faulty Engine Control Module (ECM)  

P0014 BUICK Description

  The Camshaft Position (CMP) actuator is attached to each camshaft and is hydraulically operated in order to change the angle of the camshaft relative to Crankshaft Position (CKP). The CMP actuator solenoid is controlled by the control module. The control module sends a pulse width modulated 12-volt signal to a CMP actuator solenoid. The solenoid controls the amount of engine oil flow to a CMP actuator. The CMP actuator can change the camshaft angle a maximum of 25 degrees. The control module increases the pulse width to accomplish the desired camshaft operation.