OBD2 Codes

This site is supported by nonda.co. As a smart vehicle devices provider, nonda helps create a better driving experience for everyone.

Categories

,

P2128 CADILLAC Code: Meaning, Causes, and Symptoms | OBD2 Codes

P2128 CADILLAC – Accelerator Pedal Position Sensor 2 Circuit High Voltage

 

P2128: DIY Repairing Video Tutorial

https://youtu.be/0rzN2XnRjz0

Check out nonda Auto DIY Center for more engine error code repairing videos.
https://www.youtube.com/playlist?list=PL-Lyko0O0oxHe1AGvzwAz-wokJPXAtW97

 

P2128 CADILLAC Possible Symptoms

  Engine Light ON (or Service Engine Soon Warning Light)  

P2128 CADILLAC Possible Causes

  Faulty Accelerator Pedal Position Sensor,Accelerator Pedal Position Sensor harness is open or shorted,Accelerator Pedal Position Sensor circuit poor electrical connection,Faulty Electric Throttle Control Actuator  

P2128 CADILLAC Description

  The Accelerator Pedal Position (APP) sensor is made up of 2 sensors that are housed inside one assembly. The Engine Control Module (ECM) supplies a separate 5-volt reference circuit and a low reference circuit for each of the sensors. The 5-volt reference for APP sensor 1 is supplied from the same source in the ECM as the 5-volt reference for the mass air flow (MAF) sensor and the fuel tank pressure (FTP) sensor. The 5-volt reference voltage for all of the sensors is supplied on separate ECM terminals, but the terminals are connected internally to a voltage supply. The APP sensor 1 sends a signal from the sensor to the ECM indicating the accelerator pedal position. The ECM actuates the throttle plates based on this information. If the ECM detects that the APP sensors are not within a predicted value from each other, DTC P2128 sets.      

Leave a Reply

Discover more from OBD2 Codes

Subscribe now to keep reading and get access to the full archive.

Continue reading