OBD2 Codes

This site is supported by nonda.co. As a smart vehicle devices provider, nonda helps create a better driving experience for everyone.

Categories

,

B0960 GMC Code: Meaning, Causes, and Symptoms | OBD2 Codes

B0960 GMC – Parking Aid Rear Sensor 1 Right Middle Circuit

 

B0960 GMC Possible Symptoms

 

Engine Light ON (or Service Engine Soon Warning Light)

 

B0960 GMC Possible Causes

 

Faulty Parking Aid Rear Sensor 1 Right Middle,Parking Aid Rear Sensor 1 Right Middle harness is open or shorted,Parking Aid Rear Sensor 1 Right Middle circuit poor electrical connection

 

B0960 GMC Description

 

The object alarm detection system senses how close the vehicle is to an object. The distance is determined by the 4 ultrasonic sensors located in the rear bumper. The object detection system will notify the driver when backing up at speeds less than 8 km/h (5 mph), which make parking easier and helps you avoid colliding with objects such as parked vehicles. Each object sensor is a 3-wire sensor that is both a transmitter and a receiver that comprises a signal circuit, a low reference circuit, and an 8-volt supply voltage circuit. The rear object control module supplies 8 volts to the object sensors via the object sensor supply voltage circuit and provides ground via the low reference circuit. The rear object control module triggers the sensors in a sequential loop and after each sensor transmits, the rear object control module uses the echo or signal return to calculate the distance and position of an object from the rear bumper. The rear object control module directly controls the Rear Parking Assist (RPA) display. The RPA consists of 2 amber and one red LED that indicates the range of an object from the rear bumper. The rear object control module will also use an audible warning by sending a low speed GMLAN message to the radio.

 

 

 

Leave a Reply

Discover more from OBD2 Codes

Subscribe now to keep reading and get access to the full archive.

Continue reading