OBD2 Codes

This site is supported by nonda.co. As a smart vehicle devices provider, nonda helps create a better driving experience for everyone.

Categories

,

P06DD DODGE Code: Meaning, Causes, and Symptoms | OBD2 Codes

P06DD DODGE – Dual Stage Oil Pump Stuck Low

 

P06DD DODGE Possible Symptoms

 

Engine Light ON (or Service Engine Soon Warning Light)

 

P06DD DODGE Possible Causes

 

Low or dirty engine oil,Faulty Oil Pressure Sensor,Oil Pressure Sensor harness is open or shorted,Oil Pressure Sensor circuit poor electrical component.

 

P06DD DODGE Description

 

The engine oil pump features seven vanes and a moving element that continuously adjusts to maintain a regulated oil pressure supply by varying the displacement of the pump. The pump has two regulated pressure stages of operation controlled by an on/off solenoid. Low pressure mode regulation (solenoid on) is approximately 200 kPa (29 psi) and high pressure mode regulation (solenoid off) is approximately 450 kPa (65 psi). The Powertrain Control Module (PCM) switches the pump between stages based on engine operating conditions, oil and coolant temperatures, speed and load. Under most typical conditions, the pump will run in low mode from idle up to around 3000 RPM and switch fromlow to high mode between 3000 and 4000 RPM. The maximum oil pressure in the engine is limited to 1000 kPa (145 psi) by the relief valve. Pressure in the main oil gallery of the engine can be monitored with diagnostic equipment through the oil pressure sensor mounted on the rear of the oil filter module. The minimum pressure for the engine is 41 kPa (6 psi) at any operating condition. Anything under this pressure could result in damage to critical moving parts.

 

 

 

Leave a Reply

Discover more from OBD2 Codes

Subscribe now to keep reading and get access to the full archive.

Continue reading