OBD2 Codes

This site is supported by nonda.co. As a smart vehicle devices provider, nonda helps create a better driving experience for everyone.

Categories

,

P1147 2003 INFINITI G35 Code: Meaning, Causes, and Symptoms | OBD2 Codes

P1147 2003 INFINITI G35 – Heated Oxygen Sensor 2 Maximum Voltage Monitoring Bank 1

 

P1147 2003 INFINITI G35 Possible Symptoms

 

Engine Light ON (or Service Engine Soon Warning Light),Possible high fuel consumption,Possible excessive smoke from exhaust

 

P1147 2003 INFINITI G35 Possible Causes

 

Faulty heated oxygen (O2) sensor 2 (rear),Intake air leaks,Heated oxygen (O2) sensor 2 (rear) harness is open or shorted,Heated oxygen (O2) sensor 2 (rear) circuit poor electrical connection,Inappropriate fuel pressure,Faulty fuel injectors

 

P1147 2003 INFINITI G35 Description

 

The Heated Oxygen Sensor 2 (HO2S) (Rear O2 Sensor), after three way catalyst (manifold), monitors the oxygen level in the exhaust gas on each bank. For optimum catalyst operation, the air fuel mixture (air-fuel ratio) must be maintained near the ideal stoichiometric ratio. The HO2S output voltage changes suddenly in the vicinity of the stoichiometric ratio. The Engine Control Module (ECM) adjusts the fuel injection time so that the air-fuel ratio is nearly stoichiometric. The HO2S generates a voltage between 0.1 and 0.9 V in response to oxygen in the exhaust gas. If the oxygen in the exhaust gas increases, the air-fuel ratio becomes Lean. The ECM interprets Lean when the HO2S voltage is below 0.45 V. If the oxygen in the exhaust gas decreases, the air-fuel ratio becomes Rich. The ECM interprets Rich when the HO2S voltage is above 0.45 V.

 

 

 

Leave a Reply

Discover more from OBD2 Codes

Subscribe now to keep reading and get access to the full archive.

Continue reading