B1C4A JEEP – 1st Row Passenger Retractor Tensioner Circuit Shorted Together
B1C4A JEEP Possible Symptoms
Air Bag Warning Light ON
B1C4A JEEP Possible Causes
Faulty 1st Row Passenger Retractor Tensioner,1st Row Passenger Retractor Tensioner harness is open or shorted,1st Row Passenger Retractor Tensioner circuit poor electrical connection,Faulty Occupant Restraint Controller (ORC)
B1C4A JEEP Description
When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. These circuits are maintained in a floating configuration at the module (connected to neither power nor ground) as protection against inadvertent deployment. The use of the Supplemental Restraints System (SRS) Load Tool Adapter provides a test point as well as a method for opening the shorting bar connections within the harness connector. The ORC sends out a 40 mA diagnostic current on each squib voltage supply circuit at power up and every 500 ms thereafter while the ignition is in on. The module then monitors the data return wire to determine the state of the circuit.
Leave a Reply