B2292 JAGUAR – Restraint System Seatbelt Pretensioner Fault

B2292 JAGUAR Possible Symptoms

Air Bag Warning Light ON

B2292 JAGUAR Possible Causes

Faulty Safety Belt Retractor Pretensioner,Safety Belt Retractor Pretensioner harness is open or shorted,Safety Belt Retractor Pretensioner circuit poor electrical connection,Faulty Restraints Control Module (RCM)

B2292 JAGUAR Description

The Restraints Control Module (RCM) continuously monitors the safety belt retractor pretensioner circuits for an acceptable resistance range, unacceptable voltage and shorts to ground. The RCM will set on-demand and store Diagnostic Trouble Code (DTC) B2292 in memory if any of these conditions are detected to be outside of their respectful range. If the RCM detects a fault, it will send a message to the instrument cluster (IC) module to illuminate the air bag warning indicator. As the RCM continuously monitors safety belt retractor pretensioner circuits for resistance, it expects a normal resistance between 1.31 and 4.29 ohms. If a loop resistance is between 0.9 and 1.31 or between 4.29 and 5 ohms, there exists a strong potential for an intermittent fault, a DTC may or may not set. The RCM will also set an on-demand DTC if the loop resistance is less than 0.9 ohm or greater than 5 ohms.