B2294 JAGUAR – Restraint System Curtain Fault

B2294 JAGUAR Possible Symptoms

Air Bag Warning Light ON

B2294 JAGUAR Possible Causes

Faulty Safety Canopy Module,Safety Canopy Module harness is open or shorted,Safety Canopy Module circuit poor electrical connection,Faulty Restraints Control Module (RCM)

B2294 JAGUAR Description

The Restraints Control Module (RCM) continuously monitors the driver and passenger safety canopy module circuits (loop) for an acceptable resistance range, unacceptable voltage and shorts to ground. The RCM will set on-demand and store DTC B2294 in memory if any of these conditions are detected to be outside of their respectful range. If the RCM detects a fault, it will send a message to the instrument cluster module to illuminate the air bag warning indicator. As the RCM continuously monitors safety canopy module circuits for resistance, it expects a normal resistance between 1.31 to 4.29 ohms. If a loop resistance is between 0.9 and 1.31 or between 4.29 and 5 ohms, there exists a strong potential for an intermittent fault, a DTC may or may not set. The RCM will also set an on-demand DTC if the loop resistance is less than 0.9 ohm or greater than 5 ohms.